Huawei NetCol8000-C070 User Manual page 73

NetCol8000-C(070, 130, 190) In-room Chilled Water
Smart Cooling Product
User Manual
Figure 3-45 CAN networking and grouping
----End
Connecting the FE Monitoring Network Cable (SNMP/Modbus-TCP)
Step 1 Connect one end of the monitoring network cable (standard network cable) to the
FE_1 port or FE_2 on the main control module, and connect the other end to the
monitoring device.
Figure 3-46 Connecting the FE monitoring network cable
----End
Issue 02 (2020-08-30)
grouping of the last smart cooling product in each monitoring group to
Enable. Setting path: Settings > Comm Settings > Modbus Settings.
NO TE
This wiring method applies to the smart module scenarios or other scenarios with LAN
switches regardless of teamwork networking.
Copyright © Huawei Technologies Co., Ltd.
3 Installation Guide
65