NetCol8000-C(070, 130, 190) In-room Chilled Water
Smart Cooling Product
User Manual
Figure 3-54 Removing the cap front panel
Step 2 Secure the left and right sides of the cap using six M5 screws and the front and
rear of the cap using four M5 screws.
Figure 3-55 Securing a cap
Step 3 Secure the cap front panel to the frame, and adjust the angle of the front panel
blade.
● During the installation, grasp the panel frame instead of the blade to move the
panel to avoid blade deformation.
● The cap should be well sealed to the smart cooling product to ensure good
sealing performance in-between.
Issue 02 (2020-08-30)
NO TICE
Copyright © Huawei Technologies Co., Ltd.
3 Installation Guide
74