Huawei NetCol8000-C070 User Manual page 229

NetCol8000-C(070, 130, 190) In-room Chilled Water
Smart Cooling Product
User Manual
Menu
Issue 02 (2020-08-30)
Name
Humidifying
function
Humidifying
Dehumidifying
function
Supply air temp
to forcibly start
cooling
Copyright © Huawei Technologies Co., Ltd.
Parameter Description
Enable indicates that the
electric humidifier will be
started when the ambient
humidity is lower than the
certain humidity range of
the humidity set point.
Disable indicates that the
electric humidifier will not
be started. Enabled when
active power indicates
that the electric humidifier
will be started when the
main power is active and
the ambient humidity is
lower than the certain
humidity range of the
humidity set point.
Specifies the starting mode
of the humidifier.
Enable indicates that the
dehumidification function
will be enabled when the
ambient humidity exceeds
the certain humidity range
of the humidity set point.
Disable indicates that the
dehumidification function
will not be enabled.
Enabled when active
power indicates that the
dehumidification function
will be enabled when the
main power is active and
the ambient humidity
exceeds the certain
humidity range of the
humidity set point.
Specifies the temperature
threshold for forcibly
starting the compressor
when the supply air
temperature is higher than
the threshold.
D Parameter Description
Default Value
Enable
Humidifying
only
Enable
25.0 °C
221