Huawei NetCol8000-C070 User Manual page 150

NetCol8000-C(070, 130, 190) In-room Chilled Water
Smart Cooling Product
User Manual
Alar
m ID
A092
A093
Issue 02 (2020-08-30)
Alarm Alarm Possible Cause
Name Severi
ty
Hot aisle Warni 1. The temperature
low ng sensors or temperature
temperat and humidity sensors are
ure located in inappropriate
alarm positions.
2. The thermal load
power is low.
3. The ambient
temperature is below the
lower threshold.
4. The low temperature
alarm threshold is
inappropriate.
5. The value detected by
the temperature sensor
or temperature and
humidity sensor is
different from the actual
value.
6. The air filters are
blocked.
7. The chilled water valve
is stuck or faulty.
High Warni 1. The thermal load
humidity ng power is low.
alarm
2. The ambient humidity
exceeds the upper
threshold.
3. The temperature and
humidity sensor is not
installed in a proper
position.
4. The high humidity
alarm threshold is
inappropriate.
5. The value detected by
the temperature and
humidity sensor is
different from the actual
value.
Copyright © Huawei Technologies Co., Ltd.
6 System Operation and Maintenance
Solution
1. Adjust the positions
of the temperature
sensors or temperature
and humidity sensors.
2. Contact Huawei
technical support.
3. Measure the
ambient temperature.
Check whether other
causes exist if the
alarm persists in a long
time after startup.
4. Adjust the low
temperature alarm
threshold.
5. Calibrate or replace
the temperature sensor
or temperature and
humidity sensor.
6. Maintain or replace
the air filters.
7. Maintain or replace
the chilled water valve.
1. Contact Huawei
technical support.
2. Measure the
ambient humidity.
3. Adjust the position
of the temperature and
humidity sensor.
4. Adjust the high
humidity alarm
threshold.
5. Calibrate or replace
the temperature and
humidity sensors.
142