Webui Operations - Huawei NetCol8000-C070 User Manual

NetCol8000-C(070, 130, 190) In-room Chilled Water
Smart Cooling Product
User Manual
Prerequisites
You have obtained CA certificate file, local certificate file, and key file into a
USB disk that is connected to the USB port located on the side of the main control
board and has been recognized.
You are advised to use the FAT32 USB flash drive with a capacity no greater than
64 GB. Format the non-FAT32 USB flash drives into FAT32 ones before using them.
● Ensure that the key file has been encrypted using AES128.
● Before using a USB flash drive, ensure that its data has been scanned by
antivirus software and is secure.
Procedure
Step 1 On the home page, choose Maint > USB Operations > Import Certificate, as
shown in
Figure 7-22 Importing a certificate
Step 2 Select Client certificate or Server certificate based on the type of the certificate
in use.
Step 3 Tap Browse... next to Upload CA certificate file.
Step 4 Select the CA certificate file to be imported.
Step 5 Upload the local certificate file and the key file in turn in the same way.
Step 6 Enter Key password and Confirm key password.
Step 7 Tap Submit.
●
●
----End

7.2 WebUI Operations

Issue 02 (2020-08-30)
NO TICE
Figure 7-22.
If files are imported successfully, a success message will be displayed.
If files fail to be imported, the message indicating the cause for failure will be
displayed. Rectify the fault according to the message and import files again.
Copyright © Huawei Technologies Co., Ltd.
7 FAQ
198