Using The Fusiondirector Webui To Collection Information In Batches; Using The Mm510 Cli To Collect Information (Fusionserver Pro G5500) - Huawei E9000 Troubleshooting Manual

Huawei Servers
Troubleshooting
Log collection takes about 20 minutes. When log collection is complete, a log file
named one_touch_info_all.tar.gz is displayed in the File Name area.
Step 4 In the dialog box displayed, download the log file to the local PC as prompted. (In
some browsers, the log file is automatically saved in the default directory.)
----End
8.6 Using the FusionDirector WebUI to Collection
Information in Batches
Operation Scenario
If the management module is MM920 or MM921, you can use the FusionDirector
WebUI to collect logs.
Prerequisites
The MM920 or MM921 has been managed by FusionDirector.
Procedure
Step 1 Log in to the FusionDirector WebUI. For details, see
FusionDirector
Step 2 Choose Menu > Alarms and Logs > Log. The Log page is displayed.
Step 3 Click Collect Log. In the displayed dialog box, click OK.
The Task area is displayed on the right of the page, showing the progress and
status of the log collecting task.
When the task is complete, a message indicating success is displayed.
Step 4 Click Export Log to export the log information to a local directory.
----End
8.7 Using the MM510 CLI to Collect Information
(FusionServer Pro G5500)
The MM510 is the management module of the FusionServer Pro G5500.
Prerequisites
You have logged in to the CLI of the MM510. For details, see
the MM510
Issue 20 (2020-09-25)
WebUI.
NO TE
Use the MM510 CLI to collect information about the MM510 and heterogeneous nodes in
batches. To collect information about the server, MM510, and heterogeneous nodes in
batches, use the iBMC. For details, see
CLI.
Copyright © Huawei Technologies Co., Ltd.
8.12 Logging In to the
8.3 Using iBMC to Collect Information in
8 Common Operations
Batches.
8.13 Logging In to
139