Huawei E9000 Troubleshooting Manual page 173

Huawei Servers
Troubleshooting
Figure 8-38 PuTTY Configuration
Step 3 Set the login parameters.
Set parameters as follows:
●
●
●
●
Step 4 (Optional) After logging in to the Ethernet plane by using PuTTY, if you fail to
delete characters on the CLI by using the Backspace key, choose Terminal >
Keyboard, and select Control-H under The Backspace key, as shown in
8-39.
Issue 20 (2020-09-25)
Host Name (or IP address): Enter the IP address of the server to be logged in
to, for example, 192.168.2.10.
Port: Retain the default value 22.
Connection type: Retain the default value SSH.
Close window on exit: Retain the default value Only on clean exit.
NO TE
Configure Host Name and Saved Sessions, and click Save. You can double-click the saved
record under Saved Sessions to log in to the server the next time.
Copyright © Huawei Technologies Co., Ltd.
8 Common Operations
Figure
164