Huawei E9000 Troubleshooting Manual page 24

Hide thumbs Also See for E9000:
Table of Contents

Advertisement

Huawei Servers
Troubleshooting
Figure 4-1 Network connections
Step 2 Use an SSH tool and the MM910 floating IP address to connect to the MM910 CLI.
For details about how to use PuTTY for SSH login, see
Server Over a Network Port by Using
Issue 20 (2020-09-25)
NO TE
The MM910 management port is provided by two modes.
An Ethernet port on the switch module in slot 2X or 3X can be used as the MM910
management port. However, if a CX910/CX911/CX912/CX913/CX915 is in slot 2X or 3X,
only a GE port can be used; if a CX920 is in slot 2X or 3X, only a 10GE port can be
used; if a CX916/CX916L/CX930 is in slot 2X or 3X, only a 25GE port can be used. If a
CX110/CX111/CX310/CX311/CX312/CX320/CX710 is in slot 2X or 3X, any port can be
used. The CX910/CX911/CX912/CX913 are not recommended for providing the
management network port of the management module.
The MGMT port on the MM910 panel can be used as the MM910 management port.
For MM910 (U54) 2.25 or earlier, the port on the switch module in slot 2X or 3X is
used as the management network port by default. In this case, do not connect the
MGMT port on the MM910 and the port on the switch module to the same network
at the same time, otherwise, a network storm occurs and the network is interrupted.
For MM910 (U54) 2.26 or later, the MGMT port is used as the management network
port by default. For details about how to query the version, see the
Management Module V100R001 User Guide
You can run the outportmode command to change the mode in which the MM910
management port is provided. For details, see "Querying and Setting the Network Port
Out Mode (outportmode)" in the
Command Reference
NO TE
Step 3
to
Step 5
configure the IP address and route for the management network port of
the Ethernet switching plane. If the IP address and routing information of the management
network port have been configured, skip
Copyright © Huawei Technologies Co., Ltd.
.
MM910 Management Module V100R001
8.15 Logging In to a
PuTTY.
Step 3
to
Step
5.
4 Collecting Information
MM910
15

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents