Using Error Codes To Locate Faults - Huawei E9000 Troubleshooting Manual

Huawei Servers
Troubleshooting
Table 5-2 Methods for handling alarms
Server Type
E9000
E6000
V2 rack servers
V2/V3/V5 rack
servers
X6000
X8000
X6800
G2500
FusionServer Pro
G5500
Atlas 800 AI
inference server
(model 3010)
Atlas 800 AI
training server
(model 9010)

5.4 Using Error Codes to Locate Faults

The following servers support the fault diagnosis LED: RH1288 V3, RH2288 V3,
RH2288H V3, RH5885 V3, 5288 V3, 1288H V5, 2288 V5, 2288H V5, 2488 V5,
Issue 20 (2020-09-25)
Reference
FusionServer Pro E9000 Server V100R001 HMM
See the
Alarm Handling
To check switch module alarms, run the following
commands on the Ethernet switching plane:
● display trapbuffer
● display alarm active
● display alarm history
NOTE
For details about how to log in to the Ethernet switching plane of
a switch module, see
Network Port by Using
a Serial Port by Using
Node, Passthrough Module, or Switch Module by Using the SOL
Function of the
E6000 Server V100R002 Alarm Reference
See the
Huawei Rack Server Alarm Handling (iMana
See the
200)
.
FusionServer Pro Rack Server iBMC Alarm
See the
Handling
.
FusionServer Pro X6000 Server iBMC (Earlier
See the
than V250) Alarm Handling
Handling (iMana 200)
X8000 Server V100R001 Alarm Reference
See the
FusionServer Pro X6800 Server iBMC (Earlier
See the
than V250) Alarm Handling
FusionServer Pro G2500 Server 1.0.0 iBMC Alarm
See the
Handling
.
FusionServer Pro G5500 Server iBMC Alarm
See the
Handling
.
Atlas 800 AI Inference Server iBMC Alarm
See the
Handling (Model 3010)
Atlas 800 AI Training Server iBMC (V3.01.00.00
See the
or Later) Alarm Handling (Model 9010)
Copyright © Huawei Technologies Co., Ltd.
5 Diagnosing and Rectifying Faults
.
8.15 Logging In to a Server Over a
PuTTY, 8.16 Logging In to a Server Over
PuTTY, or 8.17 Logging In to a Compute
MM910.
X6000 Server Alarm
or
.
.
.
.
.
.
40