Commissioning Fire Extinguishing Devices; Commissioning The Extinguishant Control Panel (Ce) - Huawei FusionModule1000A40 Commissioning Manual

Prefabricated all-in-one data center

Hide thumbs Also See for FusionModule1000A40:

Table of Contents

FusionModule1000A40 Prefabricated All-in-One Data

Center

Commissioning Guide

Documents: monitoring device layout diagram, emergency exit diagram

Skill requirement: weak-current engineer familiar with the management system

Procedure

Step 1 Open the physical lock.

Step 2 Open the magnetic door lock by swiping an IC card.

Step 3 Rotate the door handle clockwise and pull open the pre-fab. module door.

Step 4 Enter the pre-fab. module and close the module door.

Step 5 Push the emergency exit rod, and check whether the emergency exit door opens properly.

Step 6 Verify that the management system generates a door open alarm.

Step 7 Press the exit button and push open the pre-fab. module door.

Step 8 Close the pre-fab. module door, and open the cover of the emergency door release button.

Step 9 Remove the cover of the emergency door release button using a Phillips screwdriver, remove

the glass, and rotate the door handle clockwise to open the pre-fab. module door. If the door

can be opened, the emergency door release button is working properly.

Step 10 Install the emergency door release button.

----End

8.4 Commissioning Fire Extinguishing Devices

Context

Initial configuration parameters have been set for the extinguishant control panel before

delivery and do not need to be set onsite.

Issue 04 (2020-01-17)

For the diagrams, see the initial configuration parameter manual for the solution in use.

If you do not open the pre-fab. module door in 6s after swiping the card, the electromagnetic lock locks

the pre-fab. module door again.

Normal response: The pre-fab. module door can be opened, and the management system logs the door

opening event.

Normal response: The pre-fab. module door can be opened, and the management system logs the door

opening event.

8 Commissioning Core Components

Table of Contents