About This Document - Huawei FusionModule1000A40 Commissioning Manual

FusionModule1000A40 Prefabricated All-in-One Data
Center
Commissioning Guide
Purpose
This document describes how to power on and commission the FusionModule1000A
prefabricated all-in-one data center (FusionModule1000 for short) in terms of safety
precautions, preparations, power-on check, power on commissioning, joint commissioning,
power-off, and core device commissioning. It provides you a quick grasp of how to
commission the prefabricated all-in-one data center.
Intended Audience
This document is intended for:




Symbol Conventions
The symbols that may be found in this document are defined as follows.
Symbol
Issue 04 (2020-01-17)
Maintenance engineers
Technical support engineers
System engineers
Commissioning engineers
Copyright © Huawei Technologies Co., Ltd.

About This Document

Description
Indicates a hazard with a high level of risk which, if not
avoided, will result in death or serious injury.
Indicates a hazard with a medium level of risk which, if not
avoided, could result in death or serious injury.
Indicates a hazard with a low level of risk which, if not
avoided, could result in minor or moderate injury.
Indicates a potentially hazardous situation which, if not
avoided, could result in equipment damage, data loss,
performance deterioration, or unanticipated results.
NOTICE is used to address practices not related to personal
injury.
About This Document
ii