Initial Configuration Of Temperature And Humidity - Huawei FusionModule1000A40 Commissioning Manual

FusionModule1000A40 Prefabricated All-in-One Data
Center
Commissioning Guide

8.2.4 Initial Configuration of Temperature and Humidity

Prerequisites
You have powered on the air-cooled smart cooling products.
Preparations
Tools: none
Documents: management system initial configuration table, cooling device layout diagram,
cooling device initial configuration table
Skill requirement: cooling engineer


Context
Cooling products in one module constitute a group. You need to set the temperature and
humidity of the cooling product system on the master unit in each group before cooling
products in the group are used.
Procedure
Step 1 Tap Settings > System Settings on the main screen to enter the page shown in
Issue 04 (2020-01-17)
Air-cooled smart cooling products include 21 kW and 25 kW models.
For the diagrams and tables, see the initial configuration parameter manual for the solution
in use.
 To change the settings, you need to log in as the Admin user. For the password, see the management
system initial configuration table.
 You need to obtain permission before changing system settings. Only trained and qualified personnel
can change settings excluding the control type and set point of the T/H sensor.
Copyright © Huawei Technologies Co., Ltd.
8 Commissioning Core Components
Figure 8-13.
64