Commissioning The Emergency Light (Ce) - Huawei FusionModule1000A40 Commissioning Manual

Prefabricated all-in-one data center

Hide thumbs Also See for FusionModule1000A40:

Table of Contents

FusionModule1000A40 Prefabricated All-in-One Data

Center

Commissioning Guide

Preparations

Tools: none

Documents: power supply and distribution system diagram, documents delivered with the

extinguishant control panel, fire extinguishing system conceptual diagram (CE), fire

extinguishing device layout diagram (CE)

Skill requirement: fire engineer

Procedure

Step 1 Switch on the input power circuit breaker of the extinguishant control panel or connect the

extinguishant control panel batteries to power on the extinguishant control panel.

Step 2 Flip the key to Enable Control rightward, and set the access level of the extinguishant

control panel to 2.

Step 3 Press Silence/Sound Alarm to start or abort the fire alarm bell.

Step 4 Press Alarm/Fault Warning Silence to silence the fault noise generated by the extinguishant

control panel.

Step 5 Press Reset to reset the extinguishant control panel, and reset the key to Enable Control by

flipping it leftward.

----End

8.4.2 Commissioning the Emergency Light (CE)

Prerequisites

The sockets of the emergency light have been powered on.

Preparations

Tools: step ladder, Phillips screwdriver

Documents: power supply and distribution system diagram, fire extinguishing device layout

diagram (CE)

Skill requirement: fire engineer

Procedure

Step 1 Turn off the upstream switch of the emergency light power cable.

Issue 04 (2020-01-17)

For the diagrams, see the initial configuration parameter manual for the solution in use.

8 Commissioning Core Components

Table of Contents