Huawei FusionModule1000A40 Commissioning Manual page 23

FusionModule1000A40 Prefabricated All-in-One Data
Center
Commissioning Guide
Tools
Heat gun
RJ45 crimping tool
Hand-held thermometer
Clamp meter


Issue 04 (2020-01-17)
This table may not list some tools required at specific sites. Onsite installation personnel and
technical support personnel should prepare tools based on site requirements.
Some dedicated tools and installation materials provided with the equipment may not be listed in
this table.
Copyright © Huawei Technologies Co., Ltd.
4 Preparations for Power-On Commissioning
ESD floor suction plate
Wire stripper
Heat shrink tubing
Insulation megohmmeter
Adjustable wrench
Flashlight
Phase-sequence meter
Point thermometer
17