Table of Contents
Advertisement
Computer Configuration Requirements
To use the E618/612, the following are required for your computer:
A type II PCMCIA Card slot, supporting CARDBUS
A Pentium 100 processor or above
32MB RAM or above
Windows XP or Windows 2000 operating system
Display resolution of 800 x 600 pixels or above; that of 1024 x 768 pixels is
recommended.
Preparing the E618/612
1 Take out the E618/612 from the protective cover.
2 As shown in the following figure, place the USIM/SIM card into the slot on
the back of the E618/612 card with its golden contact downwards and the
blunt corner inwards, and make sure that the card is fully in place.
4
Getting Started
7
HUAWEI
Advertisement
Table of Contents
