Simulation Data Synchronization; Simulation Data - Siemens SINUMERIK 840D sl Commissioning Manual

08/2005

2.6 Simulation Data Synchronization

This function can be used to simulate machining on screen. Data evaluated by the
simulation has to be copied into data management in the Dialog
programming\Simulation data directory (\DP.DIR\SIM.DIR).
When the simulation program is started the following functions can be selected with
the Data matching softkey:
•
Match setup data
•
Match tools
•
Match machine data
•
Match cycles

2.6.1 Simulation Data

Files used
When HMI Advanced is started up, the following files are initialized for the
simulation in data management directory \DP.DIR\SIM.DIR.
UMAC.DEF
SMAC.DEF
SMAC_SC.DEF
MMAC.DEF
UGUD.DEF
SGUD.DEF
MGUD.DEF
GUD4.DEF
GUD5.DEF
GUD6.DEF
GUD7.DEF
GUD7_SC.DEF
GUD8.DEF
GUD9.DEF
CH(c)_RPA.INI
CH(c)_GUD.INI, NC_GUD.INI
CH(c)_SEA.INI, NC_SEA.INI
AX_SEA.INI
CH(c)_UFR.INI, NC_UFR.INI
CH(c)_PRO.INI
NC_CEC.INI
TO_INI.INI
INITIAL.INI
DPCUSCYC.COM
© Siemens AG, 2005. All rights reserved
SINUMERIK 840D sl/840D/840Di/810D Installation and Start-Up HMI (IAM) - 08/2005 Edition
Commissioning HMI Advanced (IM4)
User macros
System macros
"
Machine manufacturer macros
Global user data
Global system data
Global machine manufacturer data
NC user data 4
NC user data 5
NC user data 6
NC user data 7
"
NC user data 8
NC user data 9
R parameters (channel-specific)
User data (channel-specific, global)
Setting data (channel-specific, global)
Setting data for axes
Work offsets (channel-specific, global)
Protection zones (channel-specific)
Sag/angularity
Tool data (complete)
NCK initialization data
Description of the user cycle interfaces
2 Functions/Parameterization
IM4/2-119