Siemens SINUMERIK 840D sl Commissioning Manual page 2

SINUMERIK® Documentation
Printing history
Brief details of this edition and previous editions are listed below.
The status of each edition is shown by the code in the "Remarks" columns.
Status code in the "Remarks" column:
A .... New documentation.
B .... Unrevised reprint with new order no.
C .... Revised edition with new status.
If factual changes have been made on the page in relation to the same software version, this is indicated
by a new edition coding in the header on that page.
Edition Order No.
12.98 6FC5297-5AE20-0BP0
08.99 6FC5297-5AE20-0BP1
02.01 6FC5297-6AE20-0BP0
11.01 6FC5297-6AE20-0BP1
11.02 6FC5297-6AE20-0BP2
03.04 6FC5297-6AE20-0BP3
08/2005 6FC5397-3AP10-0BA0
Trademarks
All designations marked with the industrial property rights sign (R) are registered trademarks of
Siemens AG. Other product names used in this documentation may be trademarks which, if used
by third parties, could infringe the rights of their owners.
Disclaimer of liability
We have checked that the contents of this document correspond to the hardware and software
described. Nevertheless, differences might exist and we cannot, therefore, guarantee that they are
completely identical. The information contained in this document is, however, reviewed regularly
and any necessary changes will be included in the next edition.
Siemens AG
Automation and Drives
Postfach 4848
90437 NÜRNBERG
GERMANY
Remarks
A
C
C
C
C
C
C
Copyright © Siemens AG, 1995 - 2005.
Order No. 6FC5397-3AP10-0BA0
Printed in Germany
Siemens AG, 2005.
Subject to change without prior notice.