Siemens SINUMERIK 840D sl Commissioning Manual page 492

Commissioning HMI Advanced (IM4)
2 Functions/Parameterization
[KEYS]
Cancel=Escape
[Helpcontext]
File0=hlp\alarm_ .pdf
[MmcAlarmDisable]
DisableSenderOfMmcAlarm0=mbdde
DisableSenderOfMmcAlarm1=NCU
DisableSenderOfMmcAlarm2=PLC
DisableSenderOfMmcAlarm3=
DisableSenderOfMmcAlarm4=
DisableSenderOfMmcAlarm5=
DisableSenderOfMmcAlarm6=
DisableSenderOfMmcAlarm7=
DisableSenderOfMmcAlarm8=
IM4/2-98
SINUMERIK 840D sl/840D/840Di/810D Installation and Start-Up HMI (IAM) - 08/2005 Edition
; information about keys that may be used to clear an alarm
; A function key (e.g., ESCAPE) is assigned the cancel function.
; This makes it possible to acknowledge alarm cancellations on the
; PC development system, too. ----------------------------------------------------
; This section specifies the names and paths of the help files that
; contain help texts in WinHelp format.
; This list includes a maximum of 10 entries.
; The file name fragments must not exceed 6 characters, because it is
; extended automatically by the message module according to the
; selected language. A filename extension may also be added (optional).
; For additional information, see SINUMERIK 840D OEM package
; HMI User's Manual.
For OEM users:
; reserve some sender names of HMI alarms. The names mbdde,
; NCU, and PLC are reserved for mbdde-internal purposes.
© Siemens AG, 2005. All rights reserved
08/2005