Siemens SINUMERIK 840D sl Commissioning Manual page 494

Commissioning HMI Advanced (IM4)
2 Functions/Parameterization
[Local]
ADDRESS0=0,NAME=/NC,LINE=0
ADDRESS1=0,NAME=/PLC,LINE=0
ADDRESS4=/SELF,0
[NCU840D]
ADDRESS0=13,NAME=/NC,SAP=d
ADDRESS1=13,NAME=/PLC,SAP=1
ADDRESS4=/SELF,10000103
;[NCU840D]
;ADDRESS0=192.168.214.1,LINE=10,NAME=/NC,SAP=040d,PROFILE=CLT1__CP_L4_INT
;ADDRESS1=192.168.214.1,LINE=10,NAME=/PLC,SAP=0201,PROFILE=CLT1__CP_L4_INT
;ADDRESS2=192.168.214.1,LINE=10,NAME=/CP,SAP=0501,PROFILE=CLT1__CP_L4_INT
;ADDRESS10=192.168.214.1,LINE=10,NAME=/DRIVE0,SAP=0201,SUBNET=004B-00000008:3,
PROFILE=CLT1__CP_L4_INT
;ADDRESS11=192.168.214.1,LINE=10,NAME=/DRIVE1,SAP=0a00,PROFILE=CLT1__CP_L4_INT
;ADDRESS12=192.168.214.1,LINE=10,NAME=/DRIVE2,SAP=0b00,PROFILE=CLT1__CP_L4_INT
;ADDRESS13=192.168.214.1,LINE=10,NAME=/DRIVE3,SAP=0c00,PROFILE=CLT1__CP_L4_INT
;ADDRESS14=192.168.214.1,LINE=10,NAME=/DRIVE4,SAP=0d00,PROFILE=CLT1__CP_L4_INT
;ADDRESS15=192.168.214.1,LINE=10,NAME=/DRIVE5,SAP=0e00,PROFILE=CLT1__CP_L4_INT
The language selection can also be made via the HMI user interface in the "Start-
up" operating area → "HMI" → "Languages."
[LANGUAGE]
Language=UK
LanguageFont=Europe
Language2=GR
LanguageFont2=Europe
LanguageList=GR, UK, SP, FR, IT, CH
FontList=Europe, Europe, Europe, Europe, Europe, China
FontListKO=Europe2, Europe2, Europe2, Europe2, Europe2, China
LBList=deutsch, english, espanol, francais, italiano, chinese
[CONTROL]
Resolution=0
BaseScreen=640x480
IM4/2-100
SINUMERIK 840D sl/840D/840Di/810D Installation and Start-Up HMI (IAM) - 08/2005 Edition
For OEM users
; Example: 840D via OPI connection
SINUMERIK powerline only
; Example:
; WINCOS-->CP-->TCPIP-->CP-->LINCOS-->NC/PLC/DRIVE0-5
; 1.) change TCPIP address below to your target TCPIP address
; 2.) do not forget to start your windows CP (e.g., cp_840di.exe)
; 3.) Hinweis: no disconnection detection in some cases
SINUMERIK solution line only
Relevant for HMI-Advanced on PC/programming device only
; Resolution: 0=fixed (640x480 default), 1=variable
; BaseScreen specifies the resolution, for which the applications
; were developed originally (typically: 640x480)
; BaseScreen - default: 640x480
© Siemens AG, 2005. All rights reserved
08/2005