Siemens SINUMERIK 840D sl Commissioning Manual page 455

08/2005
From the skeleton application a particular function of an operating area that is
accessible from it can be selected specifically. (e.g. Program → Simulation, all
standard possibilities are given in the table below). A skeleton application can
provide its own home screen as a bitmap file or display a standard image.
Configuration principle
New operating levels are created by skeleton applications and attached to existing
operating levels. The assignments of horizontal and vertical softkey bars for
skeleton applications can be configured.
Configuration files
Configuration is carried out in the following files:
REGIE.INI
TASKCONF.INI
RE_xx.INI
•
REGIE.INI
In REGIE.INI an interpreter task mntmmc is specified as a task in which the
CmdLine:="SectionName1" parameter indicates the section in which additional
information about the inserted skeleton application in the TASKCONF.INI file is
located.
For additional details, refer to the description of the initialization files
•
TASKCONF.INI Description of the softkeys and the operating areas
•
RE_xx.INI
Examples
The following sample entries should clarify the procedure:
REGIE.INI
Skeleton application for user-specific operating trees.
; Sample entry
Task7 = name := mntmmc, cmdline := "SectionName1", Timeout := 60000
The task number (7 in this case) is assigned to the softkey that calls the skeleton
application.
Task0: Horizontal softkey 1
...
Task7: Horizontal softkey 8
mntmmc is the name of a standard task for interpreting the softkeys in the
skeleton application in TASKCONF.INI and for activating them.
The value of cmdline indicates the section in the TASKCONF.INI file in which the
softkey assignments in the skeleton application are described in detail.
© Siemens AG, 2005. All rights reserved
SINUMERIK 840D sl/840D/840Di/810D Installation and Start-Up HMI (IAM) - 08/2005 Edition
Calls the skeleton application(s), standard applications
that can be called with them, background picture, texts
for softkey labeling. Details are given in the section
specified in the CmdLine attribute, as described above.
wurde.
Softkey labeling in the skeleton application for the language
with the abbreviation xx.
Commissioning HMI Advanced (IM4)
2 Functions/Parameterization
IM4/2-61