Siemens SINUMERIK 840D sl Commissioning Manual page 6

Preface
Correct usage
Please note the following:
!
Warning
The unit may be used only for the applications described in the catalog or the
technical description, and only in combination with the equipment, components and
devices of other manufacturers where recommended or permitted by Siemens.
Correct transport, storage, installation and assembly, as well as careful operation
and maintenance, are required to ensure that the product operates safely and
without faults.
Notes
The following notes with a special meaning are used in the documentation:
Note
This symbol always appears in this documentation where further, explanatory
information is provided.
Ordering Data Option
In this documentation you will find the symbol shown on the left with are ference
to an ordering data option. The described function is only executable on the
control if the control has the designated option.
vi
SINUMERIK 840D sl/840D/840Di/810D Commissioning CNC Part 2 (HMI) (IAM) – 08/2005 Edition
© Siemens AG, 2005. All rights reserved
08/2005