Activation On Startup; Activation Via Keys; Features Of The Custom Area - Siemens SINUMERIK 840D sl Commissioning Manual

08/2005
6.1.2

Activation on startup

HMI Advanced
See Integrating the Custom operating area 6.1.5 b)
HMI Embedded
Using the display machine data MD 9016: MM_SWITCH_TO_AREA, you can
define in which operator area HMI Embedded should run-up; whereby, the
CUSTOM operating are can be specified.
The value in the MD provides the number of the softkey for the required operating
area.
Horizontal softkeys 1 – 8:
Softkeys of the 1st continue bar after pressing ETC:
The standard default setting is 12.
6.1.3

Activation via keys

With hotkey
The CUSTOM hotkey on the OP 010 and OP 010C always activates this operating
area (default). Other additional configurations are possible.
With horizontal softkey
The standard activation is via horizontal softkey 4 in the 1st step menu.
The softkey assignment can be changed for
HMI-Advanced
As specified in 6.1.5
for
HMI-Embedded
using the Software Configuration Kit (SCK).
6.1.4

Features of the Custom area

The CUSTOM operating area displays a standard empty window with a
configurable header across the whole area of the local menu.
The CUSTOM operating area also permits a configurable text in the operating area
display field in the global menu.
All softkeys are empty and can be assigned as required by the customer using the
Expand user interface definition and given Expand user interface functionality.
When switching from and back to the CUSTOM area, the configured screen, which
was active before exiting the CUSTOM operating area, is active.
© Siemens AG, 2005. All rights reserved
SINUMERIK 840D sl/840D/840Di/810D HMI Installation and Start-Up Guide (IAM) – 08/2005 Edition
Expanding the OperatorInterface (BE1)
Integrating the Custom operating area
6 Custom Operating Area
1 – 8
9 – 16
BE1/6-147