Siemens SINUMERIK 840D sl Commissioning Manual page 298

Starting Up HMI Embedded (IM2)
4 Functions/Parameterization
//* Name of channel area 7 and names of channels of channel
area 7 */
3080246
3080247
3080248
3080249
3080250
3080251
3080252
3080253
3080254
//* Name of channel area 8 and names of channels of channel
area 8 */
3080255
3080256
3080257
3080258
3080259
3080260
3080261
3080262
3080263
The OEM user can enter texts by inserting them in the blank character strings (see
above "")!
8 characters are possible per softkey bar; the carriage return is created with
characters "%n": e.g., "NC3Turn%nChann1".
4.5 Selecting tool management
The ShopTurn, ShopMill tool management function is activated using the display
machine data MD 9414: TM_KIND_OF_TOOLMANAGEMENT for the
representation of ShopMill/ShopTurn.
MD 9414 = 1
MD 9414 = 0
All the information needed for setup can be found in:
References:
IM2/4-48
SINUMERIK 840D sl/840D/840Di/810D HMI Installation and Start-Up Guide (IAM) – 08/2005 Edition
"" //2x9 T_CHAN_AREA_7
"" //2x9 T_CHAN_AREA_7_CHANNEL_1
"" //2x9 T_CHAN_AREA_7_CHANNEL_2
"" //2x9 T_CHAN_AREA_7_CHANNEL_3
"" //2x9 T_CHAN_AREA_7_CHANNEL_4
"" //2x9 T_CHAN_AREA_7_CHANNEL_5
"" //2x9 T_CHAN_AREA_7_CHANNEL_6
"" //2x9 T_CHAN_AREA_7_CHANNEL_7
"" //2x9 T_CHAN_AREA_7_CHANNEL_8
"" //2x9 T_CHAN_AREA_8
"" //2x9 T_CHAN_AREA_8_CHANNEL_1
"" //2x9 T_CHAN_AREA_8_CHANNEL_2
"" //2x9 T_CHAN_AREA_8_CHANNEL_3
"" //2x9 T_CHAN_AREA_8_CHANNEL_4
"" //2x9 T_CHAN_AREA_8_CHANNEL_5
"" //2x9 T_CHAN_AREA_8_CHANNEL_6
"" //2x9 T_CHAN_AREA_8_CHANNEL_7
"" //2x9 T_CHAN_AREA_8_CHANNEL_8
ShopMill/ShopTurn tool management
Standard tool management (default setting)
/FBW/ Description of Functions - Tool Management
/FBSP/ Description of Functions - ShopMill
/FBT/ Description of Functions - ShopTurn
© Siemens AG, 2005. All rights reserved
08/2005