Siemens SINUMERIK 840D sl Commissioning Manual page 457

08/2005
HSK10SkText _UK=Setup
; TerminateTask=
; HSK16=ExitButton
Assignment of softkey numbers
The following assignments apply to HSK and StartIndex:
1 - 8:
9 - 16
17 - 24
25 - 32
Language-dependence of softkeys
The softkeys are labeled according to the current language setting. The softkeys
are updated whenever the language is changed. If the softkey text for the current
language (HSK<SoftkeyIndex>SkText_<Language>=...) is not found, the softkey is
assigned the default text (Entry (HSK<SoftkeyIndex>SkText=...) or, if there is no
default text, the task index.
Skeleton applications as child tasks
The skeleton application can also be started from a dedicated process as a child
application. Then, upon recall, the skeleton application returns to the starting
application and closes, if applicable:
; The application is terminated on return
HSK<SoftkeyIndex>TerminateTask=1
; The application is not terminated on return. This is the default setting
HSK<SoftkeyIndex>TerminateTask=0
Home screen for the skeleton application
Unless otherwise specified with Picture= ..., a blank background is displayed.
You can specify your own picture and store it as a bitmap in the oem directory,
e.g., Picture=BackgroundSkeleton1.bmp
The screen is displayed when the skeleton application is selected or on return from
an application called by the skeleton application.
Entering 1 rather than a picture file causes the "Setup" screen to be displayed
(default).
Note
If StartIndex and a picture are configured, the picture is superimposed as soon
as the skeleton application is selected and the application configured with
StartIndex opens. If the picture is larger than the window available in the current
operating device, the part from the center of the picture that fits in the window is
displayed.
Access authorizations
© Siemens AG, 2005. All rights reserved
SINUMERIK 840D sl/840D/840Di/810D Installation and Start-Up HMI (IAM) - 08/2005 Edition
see below
see below
Horizontal softkeys 1 - 8
Horizontal softkeys in the ETC softkey bar
Vertical softkeys 1 - 8
Softkey bar for OEM applications, see 5.1.3
Or
Commissioning HMI Advanced (IM4)
2 Functions/Parameterization
; <> 0 terminate
; 0 do not terminate
IM4/2-63