Ncu-Specific Alarm Texts (Sinumerik Powerline Only) - Siemens SINUMERIK 840D sl Commissioning Manual

Commissioning HMI Advanced (IM4)
3 Creating user alarm texts

3.5 NCU-Specific Alarm Texts (SINUMERIK powerline only)

Function
If multiple PCUs and NCUs (M:N) are used, NCU-specific alarm texts can be
created and managed in the HMI.
This function requires entries to be made in the MBDDE.INI file in the [netTextFiles]
section. The file is located in the C:\USER directory.
The entries for the NCUs must match the entries in the [paramNCU_Bez] section of
the current NETNAMES.INI file.
The NETNAMES.INI file in connection with the "Multiple operator panel
fronts/NCUs" function is described in
Reference: /FB2/ B3 Multiple Operator Panel Fronts and NCUs.
Search sequence
To output an NCU-specific alarm, the associated text is searched for in the
following sequence:
1. NCU-specific texts
2. Non-NCU-specific texts
Path for alarm texts
Like the other alarm texts, the NCU-specific alarm texts (e.g. NC1_GR.COM)
should be stored in the C:\DH\MB.DIR\ directory.
Entry in MBDDE.INI
Example:
[net TextFiles]
NCU_1=C:\DH\MB.DIR\NC1_GR.COM
NCU_2=C:\DH\MB.DIR\NC2_GR.COM
NCU_3=C:\DH\MB.DIR\NC3_GR.COM
IM4/3-158
SINUMERIK 840D sl/840D/840Di/810D Installation and Start-Up HMI (IAM) - 08/2005 Edition
© Siemens AG, 2005. All rights reserved
08/2005