Siemens SINUMERIK 840D sl Commissioning Manual page 594

Creating Foreign Language Texts with Windows 2000/ 2003/ XP (TX2)
3 Input of Text
4. Under "Character set" select the code page for your text file in order to restrict
the number of available characters to this code page.
The code pages are identified as follows:
Table 3-1
Description
Windows: Chinese (Taiwan)
Windows: Chinese (PROC)
Windows: Japanese
Windows: Korean
Windows: Cyrillic
Windows: Eastern European
Windows: Turkish
Windows: Western
Entering characters
1. Choose a character you want to enter.
The information bar at the bottom will display the Unicode code (U+...,
hexadecimal), the code page code (in brackets) and the clear text
description of the character.
If you have set up the keyboard layout accordingly (see Section 3.4: Using
a different keyboard layout), the keystroke combination for entering the
character numerically will appear at the bottom right in the status bar (see
Section 3.5: Numerical text entry).
Fig. 3-2
2. Click on "Select".
The character is copied into the "Characters to copy" field.
3. Repeat steps 1 and 2 for further characters.
4. After you have selected all the characters, click on "Copy".
The characters are copied from the "Characters to copy" field to the
clipboard.
5. Go back to Word 2000/ 2003 and press Ctrl-V.
The characters are pasted from the Clipboard into the text.
TX2/3-24
SINUMERIK 840D sl/840D/840Di/810D Commissioning CNC Part 2 (HMI) (IAM) – 08/2005 Edition
Encoding of text files
Code page
950
936
932
949
1251
1250
1254
1252
© Siemens AG, 2005. All rights reserved
08/2005