Siemens SINUMERIK 840D sl Commissioning Manual page 488

Commissioning HMI Advanced (IM4)
2 Functions/Parameterization
AUTO_V_ISTW=7
AUTO_V_ZOOM=7
AUTO_V_NCPR=7
AUTO_OP_NCPR=7
AUTO_ED_NCPR=7
AUTO_SYNAKT=7
AUTO_INCHMET=7
[Customer]
MDASingleSTEP=yes
ONLY_MKS_ToolBaseDistToGo=no
NcVersionCheck=true
[BlockSearch]
; Shows (SeruproEnabled=1) or
; hides (SeruproEnabled=0)
; the softkey used to do a block search in mode "programtest".
; The softkey appears in both dialogs
; "Blocksearch Searchposition" and "Blocksearch Searchpointer"
SeruproEnabled=1
; When doing a block search in mode "programtest" you can do
; a multi-channel block search. There are 4 channel-configurations which
; define the NC-channels being affected by the block search:
; SeruproConfig =
; 1:
; 2:
;
; 3:
;
; 4:
SeruproConfig=1
IM4/2-94
SINUMERIK 840D sl/840D/840Di/810D Installation and Start-Up HMI (IAM) - 08/2005 Edition
; watch windows of Actual-values,
==>7 Suggestion everyone
; Spindles, G functions, Aux. functions,
; Feedrate, Tools or Axis feedrate in AUTO mode
; Zoom actual values in AUTO mode
==>7 Suggestion everyone
; Program overview in AUTO mode
==>6 Suggestion operator
; load + select program in AUTO mode
==>6 Suggestion operator
; Alter enable status of Prog in AUTO mode
==>5 Suggestion machine setter
; synchronous actions in AUTO mode
==>5 Suggestion machine setter
; Switch inch/metric in AUTO mode
==>6 Suggestion operator
; Due to performance issues the functionality offered with respect to
; block correction, block view and block search depends on the
; Nc-version currently used.
; However, to get access to the whole functionality, regardless of the
; Nc-Version in use,
; set the flag NcVersionCheck to False.
selected/active channel
selected/active channel and all channels having selected the same
workpiece as the active channel
selected/active channel and all channels belonging to the active
channel's mode group
all NC-channels
© Siemens AG, 2005. All rights reserved
08/2005