Edit Parameters By Value Page - ABB SACE Emax 2 Series Installation, Operation And Maintenance Instructions

Edit Parameters by value page

82 | © 2013 ABB | 1SDH001000R0002 - L7804
NOTE: In the case of Edit Parameters for value, in order to complete the setting and
return to the start menu, you need to confirm the selected value.
The page appears as follows:
Figure 81
The following table provides a description of the various areas of the page:
Pos. Description
A Cancels the operation, and opens the start menu.
B Name of the page.
C Name of the parameter to be set.
D Value selected for the parameter.
E Bar: represents the range of selectable values graphically.
F Cursor: represents the selected value graphically.
• MIN key: selects the minimum value.
G
• MAX key: selects the maximum value.
H - and + keys: allow you to increase and decrease the value selected.
I Confirm key: confirms the selected value.
Modify Parameter
I20 Threshold
Confirm
Ekip Touch protection release | 8 - Setting the parameters
ABB | SACE Emax 2