ABB SACE Emax 2 Series Installation, Operation And Maintenance Instructions page 80

76 | © 2013 ABB | 1SDH001000R0002 - L7804
Continued from the previous page
Wave forms
To open the page, from the menu Measurements, you need to select Wave forms, Network
Analyzer, and a quantity in the list. This page shows the wave form of the selected quantity,
acquired at the time of selection, and appears as follows:
A
Refresh
Figure 76
The following table provides a description of the various areas of the page:
Pos. Description
A It cancels the operation, and opens the Wave forms list.
B Quantity selected in the Wave forms list.
C The value of the quantity in position B at the time of selection.
D The wave form of the quantity in position B at the time of selection.
E Refresh key: performs a new acquisition.
Harmonics key: available if the measurement of harmonics is enabled
F (see the menu Settings, Network Analyzer), open the Harmonic
Measurements page.
B
Voltage 12
Harmonics
E F
ABB | SACE Emax 2
C
95,3V
D
Continued on the next page
Ekip Touch protection release | 6 - Menu