Circuit-Breaker Dismantling Operations - ABB SACE Emax 2 Series Installation, Operation And Maintenance Instructions

Circuit-breaker dismantling
operations
155 | © 2013 ABB | 1SDH001000R0002 - L7804
To dismantle the accessories, the following parts must be removed from the circuit-breaker:
• Transparent flange (A) of the release, by turning the screws (B).
• Escutcheon plate of the circuit-breaker (C), by removing the mounting screws (D).
Figure 85 - Removing the flange and escutcheon plate
After reassembling the accessories, the parts previously disassembled must be reassembled
as indicated:
• Escutcheon plate of the circuit-breaker (C), by screwing in the mounting screws (D). Tighten
with tightening torque 1.1 Nm.
• Transparent flange (A) of the release, by turning the screws (B).
Figure 86 - Assembly of flange and escutcheon plate
1
2
C
2
90°
A
D
C
2
1
A
D
Accessories | 1 - Preliminary considerations
ABB | SACE Emax 2
1
B
2
1
90°
B