Access From The Display - ABB SACE Emax 2 Series Installation, Operation And Maintenance Instructions

Access from the display With the modules energized, and the Local Bus enabled, the presence of the modules on the
187 | © 2013 ABB | 1SDH001000R0002 - L7804
terminal box activates additional menus on the display:
• In order to configure the inputs and output contacts.
• To display information on the modules and the state of inputs and outputs.
To enable the Local Bus, you need to select "On" in the menu Settings, Modules, Local Bus.
The following table illustrates the path for accessing the configuration parameters of the
modules from the display:
...
Network
frequency
Settings
Modules
Power
Controller
...
(1)
Like menu I 01.
(2)
Like menu O 01.
(3)
Like menu Signalling 2K-1.
NOTE: the modules can also be configured with the Ekip Connect application (see
the chapter "13 - Other accessories", and the paragraph "Ekip Connect application"
on page 221).
Local/Remote
Local Bus
...
I 01
I 02
Ekip Signalling
2K-1
O 01
O 02
Ekip Signalling
(3)
2K-2
Ekip Signalling
(3)
2K-3
...
Function
Electronic accessories | 5 - Ekip Signalling 2K modules
ABB | SACE Emax 2
Signal source
Delay
(1)
Signal source
Delay
Contact Type
Self-latching
min Activation
Time
(2)
Continued on the next page