ABB SACE Emax 2 Series Installation, Operation And Maintenance Instructions page 195

191 | © 2013 ABB | 1SDH001000R0002 - L7804
Continued from the previous page
The following table describes the programmable actions on the release:
Action
External Trip
Trip Reset
Switch on Set B
Switch on Local
Signalling Reset
Energy Reset
Description
Execution of an opening.
Reset of the opening signal.
Switching of the protections, according to the configuration,
from A to B (see paragraph "Settings Menu", in chapter "6
- Menu").
Switching of the connection from remote to local (see
paragraph "Set A-B", in chapter "11 - Hi-Touch protections").
Reset of the signals.
Resetting of the energy meters (see paragraph "Energy
meters", in chapter "15 - Measuring Measurements").
Electronic accessories | 5 - Ekip Signalling 2K modules
ABB | SACE Emax 2