Warnings - ABB SACE Emax 2 Series Installation, Operation And Maintenance Instructions

Warnings

5 | © 2013 ABB | 1SDH001000R0002 - L7804
Figure 2
The following warnings must be respected:
• READ THE INSTRUCTIONS CAREFULLY BEFORE TRYING TO INSTALL, OPERATE
OR REPAIR THE CIRCUIT BREAKER.
• Store these instructions along with other documents for instruction, maintenance and
installation, drawings and descriptive notes on the circuit-breaker.
• Keep these documents available during the installation, operation and maintenance of the
appliance. The use of these instructions facilitates proper maintenance.
• Install the circuit-breaker within the limits of the project described in the instruction manual
shipped with the unit. These circuit-breakers are designed to operate with values of voltage
and current within the limits of plate ratings. Do not install this equipment in systems
operating at nominal values exceeding these limits.
• Follow the safety procedures indicated by Your Company.
• Do not open any covers or doors, do not work on devices before removing power from
all circuits, and after making sure of that with a measuring instrument.
WARNING!
• detailed descriptions of standard procedures for installation, use, maintenance and
principles for safe operation are not included. It is important to note that this document
contains safety and precaution instructions, against certain methods (of installation, use and
maintenance) that could cause harm to personnel, damage devices, or make them unsafe.
• these warnings and alarms do not include all conceivable ways to make installation, use and
maintenance recommended by ABB or not, that may be made, or possible consequences
and complications of each conceivable way, nor shall ABB investigate all those ways.
• anyone using maintenance procedures or devices, recommended by ABB or not, must
check thoroughly that neither personal safety nor the safety devices are endangered by
mode of installation, use, maintenance or the instruments used. For more information,
questions or specific problems contact your nearest ABB representative.
• This manual is written for qualified personnel only and is not intended as a substitute for
a proper course, or experience about safety procedures for this device.
• the purchaser, installer or end user is responsible for ensuring that notices and safety signs
are posted and that all access points and switching devices are locked securely when the
switchgear is left unattended, even momentarily.
• all the information contained in this document reflects the latest product information
available at the time of printing. We reserve the right to edit the document at any time
and without notice
HAZARD
ACCIDENTAL CONTACT WITH LIVE
POINTS CAN CAUSE SHOCK, BURNS AND
RESULT IN DEATH.
Do not try to use the product in any way, before
having read this instruction manual
Emax E2.2-E4.2-E6.2 circuit-breakers | 1 - Contents
ABB | SACE Emax 2