Main Page; Start Page - ABB SACE Emax 2 Series Instructions For Use Manual

Main page To open the page, press the key HOME.
Start page To open the page, press the HOME key until the page is displayed.
8 | © 2018 ABB | 1SDH001316R0002 - ECN000086018 - Rev. C
Continued from the previous page
The following table provides a description of the various areas of the bar:
Pos. Description
It shows the type of message:
• Alarm
• Warning, error, or prealarm
A
• Information
• Active timing
B It displays the active messages one by one in a loop.
C ABB logo.
The complete list of messages is given on page 22.
The page appears as follow:
Figure 4
The following table provides a description of the various areas of the page:
Pos. Function
A It opens the Histograms page.
B It opens the Menu page.
C It opens the Measuring instruments page.
D It opens the Measurements page.
In the presence of messages, it opens the Alarm List page.
E
The system returns automatically to this page after some minute of inactivity.
The default start page is the page Histograms.
Any graphical level 2 page (accessible from the main page) can be set as the start page, except for the
pages Alarm List and Menu.
To set a page as the start page, you need to:
1. Open the page
2. Keep the HOME key pressed for at least 5 seconds.
3. Select Yes in the confirmation window that appears on the display.
Ekip Touch protection trip unit | 1 - Layout of the interface
ABB | SACE Emax 2