3 - Unpacking and handling
Opening the packaging
10 | © 2013 ABB | 1SDH001000R0002 - L7804
NOTE: to unpack the circuit-breaker safely refer to the instruction sheet in the zipped
packaging pouch.
The following is the procedure for opening the packaging:
1. Cut the bands that wrap the packing box. See Figure 6 and Figure 7.
Figure 6
2. Open the upper part of the packing box. See Figure 8 and Figure 9.
Figure 8
Figure 7
Figure 9
Emax E2.2-E4.2-E6.2 circuit-breakers | 3 - Unpacking and handling
ABB | SACE Emax 2
Continued on the next page