Lenovo RackSwitch G8264 Application Manual page 78

device. Routing on more complex networks, where subnets may not have a direct
presence on the G8264, can be accomplished through configuring static routes or
by letting the switch learn routes dynamically.
This part of the Setup program prompts you to configure the various routing
parameters.
At the prompt, enable or disable forwarding for IP Routing:
Enable IP forwarding? [y/n]
Enter y to enable IP forwarding. To disable IP forwarding, enter n. To keep the
current setting, press <Enter>.
78
G8264 Application Guide for ENOS 8.4