3. Map VLANs to MSTP instances:
4. Configure port membership and define the STGs for VLAN 2. Add server ports 3
and 4 to VLAN 2. Uplink ports 19 and 20 are automatically added to VLAN 2.
Assign VLAN 2 to STG 2.
© Copyright Lenovo 2016
RS G8264(config)# spanningtree mst configuration
RS G8264(configmst)# instance 1 vlan 1
RS G8264(configmst)# instance 2 vlan 2
RS G8264(config)# interface port 3,4
RS G8264(configif)# switchport access vlan 2
RS G8264(configif)# exit
Note: Each STG is enabled by default.
Chapter 11: Spanning Tree Protocols
207