Using Pim With Other Features; Pim With Acls Or Vmaps; Pim With Igmp; Pim With Vlag - Lenovo RackSwitch G8264 Application Manual

Using PIM with Other Features

PIM with ACLs or VMAPs

PIM with IGMP

PIM with VLAG

592
G8264 Application Guide for ENOS 8.4
If using ACLs or VMAPs, be sure to permit traffic for local hosts and routers.
If using IGMP (see Chapter
 IGMP static joins can be configured with a PIM‐SM or PIM‐DM multicast group
IPv4 address. Using the ISCLI:
RS G8264(config)# ip mroute <multicast group IPv4 address> <VLAN> <port>
 IGMP Querier is disabled by default. If IGMP Querier is needed with PIM, be
sure to enable the IGMP Query feature globally, as well as on each VLAN where
it is needed.
If the switch is connected to multicast receivers and/or hosts, be sure to enable

IGMP snooping globally, as well as on each VLAN where PIM receivers are
attached.
If using VLAG, see "VLAG with PIM" on page
32, "Internet Group Management Protocol"):
232.