Lenovo RackSwitch G8264 Application Manual page 273

In OpenFlow version 1.3:
RS G8264(config­openflow­instance)# show openflow table
Openflow instance 1 is currently disabled
Openflow Instance Id: 2
CONTROLLER added FLOWs
Flow 1, Filter Based, priority:1000, hard­time­out:0, idle­time­out:0
cookie:0x0
QUALIFIERS: in­port:PCH1
eth­dst:01:00:08:00:00:03
vlan­vid:1
Instruction: apply_action
ACTION: output:18, PCH1, PCH66
STATS: packets=0, bytes=0
Flow 2, Filter Based, priority:2, hard­time­out:0, idle­time­out:0
cookie:0x0
QUALIFIERS:
Instruction: write_action
ACTION: output:CONTROLLER [Max Len: 65535 / ­ bytes (C/S)]
STATS: packets=0, bytes=0
Flow 3, Filter Based, priority:65535, hard­time­out:0, idle­time­out:0
cookie:0x0
QUALIFIERS: eth­type:0x88cc
Instruction: write_action
ACTION: output:CONTROLLER [Max Len: 65535 / ­ bytes (C/S)]
STATS: packets=0, bytes=0
Flow 4, Filter Based, priority:0, hard­time­out:0, idle­time­out:0
cookie:0x0
QUALIFIERS:
Instruction: empty
ACTION: drop
STATS: packets=0, bytes=0
273
© Copyright Lenovo 2016 Chapter 15: OpenFlow