Lenovo RackSwitch G8264 Application Manual page 423

11. Configure vPort trunk mode.
12. Configure vPort default VLAN.
13. Ensure tagging is disabled on vPort.
14. Specify QoS parameters for the vPort.
15. Enable the vPort.
16. Enable tagging/trunk mode on port 3.
17. Configure VLAN 200 parameters.
18. Configure VLAN 300 parameters.
© Copyright Lenovo 2016
G8264(config_ufp_vport)# network mode trunk
G8264(config_ufp_vport)# network default­vlan 100
G8264(config_ufp_vport)# no network default­tag
G8264(config_ufp_vport)# qos bandwidth min 25 (in percentage)
G8264(config_ufp_vport)# qos bandwidth max 100 (in percentage)
G8264(config_ufp_vport)# enable
G8264(config_ufp_vport)# exit
G8264(config)# interface port 3
G8264(config­if)# switchport mode trunk
G8264(config­if)# switchport trunk native vlan 100
G8264(config­if)# switchport trunk allowed vlan add 200,300
G8264(config­if)# exit
G8264(config)# vlan 200
G8264(config­vlan)# vmember 1.1
G8264(config­vlan)# vmember 2.3
G8264(config­vlan)# exit
G8264(config)# vlan 300
G8264(config­vlan)# vmember 1.1
G8264(config­vlan)# vmember 2.3
G8264(config­vlan)# exit
Chapter 25: Unified Fabric Port
423