Available Profiles - Lenovo RackSwitch G8264 Application Manual

Available Profiles

290
G8264 Application Guide for ENOS 8.4
The following deployment profiles are currently available on the G8264:
 Default Profile: This profile is recommended for general network usage. Switch
resources are allocated to support a wide range of features such as IPv6, ACLs,
and FCoE/CEE.
 ACL Profile: This profile enables you to configure maximum number of ACLs.
The IPv6, FCoE/CEE, and VMready features will not be supported. This profile
also does not support the forwarding of IPMC packets with IP options.
The properties of each mode are compared in the following table.
Table 28.
Deployment Mode Comparison
Switch Feature
ACLs
IPv6
VMready
VMap
FCoE/CEE
Note: Throughout this guide, where feature capacities are listed, values reflect
those of the Default profile only, unless otherwise noted.
Capacity, by Mode
Default Openflow
256 256
Supported Not Supported
Supported Not Supported
Supported Not Supported
Supported Not Supported
ACL
896
Not Supported
Not Supported
Not Supported
Not Supported