648
G8264 Application Guide for ENOS 8.4
The following are the enterprise SNMP traps supported in ENOS:
Table 46.
Enterprise NOS‐Supported Enterprise SNMP Traps
Trap Name
swLoginFailure
swValidLogin
swApplyComplete
swSaveComplete
swFwDownloadSucess
swFwDownloadFailure
swValidLogout
swPrimaryPowerSupplyFailure
swPrimaryPowerSupplyFixed
swDefAdminDisable
swAcntStrngPswdNotMet
swAcntLocked
swAcntUnlocked
swStgNewRoot
Description
Signifies that someone failed to
enter a valid username/password
combination.
swTrapDisplayString specifies
whether the login attempt was from
CONSOLE or TELNET. In case of
TELNET login it also specifies the
IP address of the host from which
the attempt was made.
Signifies that a user login has
occurred.
Signifies that new configuration has
been applied.
Signifies that new configuration has
been saved.
Signifies that firmware has been
downloaded to
[image1|image2|boot image].
Signifies that firmware
downloaded failed to
[image1|image2|boot image].
Signifies that a user logout has
occurred.
Signifies that the primary power
supply has failed.
Signifies that the primary power
supply has been restored.
Signifies that the default admin
account has been disabled.
Signifies that the configured
password does not match strong
password complexity.
Signifies that account has been
locked.
Signifies that account has been
unlocked.
Signifies that the bridge has become
the new root of the STG.