Lenovo RackSwitch G8264 Application Manual page 227

9. Configure Internet‐facing interfaces.
10. Place the VLAG port(s) in their port LAGs.
11. Assign the LAGs to the VLAGs:
12. Verify the completed configuration:
© Copyright Lenovo 2016
RS G8264(config)# interface ip 1
RS G8264(config­ip­if)# ip address 172.1.2.11 255.255.255.0
RS G8264(config­ip­if)# vlan 30
RS G8264(config­ip­if)# enable
RS G8264(config­ip­if)# ip ospf area 1
RS G8264(config­ip­if)# ip ospf enable
RS G8264(config­ip­if)# exit
RS G8264(config)# interface ip 2
RS G8264(config­ip­if)# ip address 172.1.4.12 255.255.255.0
RS G8264(config­ip­if)# vlan 40
RS G8264(config­ip­if)# enable
RS G8264(config­ip­if)# ip ospf area 1
RS G8264(config­ip­if)# ip ospf enable
RS G8264(config­ip­if)# exit
RS G8264(config)# interface port 10
RS G8264(config­if)# lacp mode active
RS G8264(config­if)# lacp key 1000
RS G8264(config­if)# exit
RS G8264(config)# interface port 11
RS G8264(config­if)# lacp mode active
RS G8264(config­if)# lacp key 1100
RS G8264(config­if)# exit
RS G8264(config)# interface port 12
RS G8264(config­if)# lacp mode active
RS G8264(config­if)# lacp key 1200
RS G8264(config­if)# exit
RS G8264(config)# vlag adminkey 1000 enable
RS G8264(config)# vlag adminkey 1100 enable
RS G8264(config)# vlag adminkey 1200 enable
# show vlag information
Chapter 12: Virtual Link Aggregation Groups
227