Other Virtual Link Options - Lenovo RackSwitch G8264 Application Manual

8. Attach the network interface to the stub area.
9. Configure the virtual link.

Other Virtual Link Options

© Copyright Lenovo 2016
RS G8264(config)# interface ip 2
RS G8264(config­ip­if)# ip ospf area 2
RS G8264(config­ip­if)# ip ospf enable
RS G8264(config­ip­if)# exit
The nbr router ID configured in this step must be the same as the router ID that
was configured for switch #1 in Step 2 on page
RS G8264(config)# router ospf
RS G8264(config­router­ospf)# area­virtual­link 1 area 1
RS G8264(config­router­ospf)# area­virtual­link 1 neighbor­router
10.10.10.1
RS G8264(config­router­ospf)# area­virtual­link 1 enable
 You can use redundant paths by configuring multiple virtual links.
 Only the endpoints of the virtual link are configured. The virtual link path may
traverse multiple routers in an area as long as there is a routable path between
the endpoints.
572.
Chapter 35: Open Shortest Path First
575