4. Examine the aggregation information on each switch.
© Copyright Lenovo 2016
# show portchannel information
PortChannel 3: Enabled
Protocol—Static
port state:
2: STG 1 forwarding
9: STG 1 forwarding
16: STG 1 forwarding
Information about each port in each configured LAG is displayed. Make sure that
LAGs consist of the expected ports and that each port is in the expected state.
The following restrictions apply:
Any physical switch port can belong to only one LAG.
Up to 32 ports can belong to the same LAG.
All ports in static LAGs must be have the same link configuration (speed, duplex,
flow control).
Aggregation with third‐party devices must comply with Cisco
technology.
®
EtherChannel
Chapter 10: Ports and Link Aggregation
®
179