Lenovo RackSwitch G8264 Application Manual page 386

2. Configure each allocated priority group with a description (optional), list of 802.1p
3. Configure the strict priority group with a description (optional) and a list of 802.1p
4. Save the configuration.
386
G8264 Application Guide for ENOS 8.4
priority values, and bandwidth allocation:
RS G8264(config)# cee global ets priority­group pgid 0 priority 0,1,2
RS G8264(config)# cee global ets priority­group pgid 0 description
"Regular LAN"
RS G8264(config)# cee global ets priority­group pgid 1 priority 3
RS G8264(config)# cee global ets priority­group pgid 1 description "SAN"
RS G8264(config)# cee global ets priority­group pgid 2 priority 4
RS G8264(config)# cee global ets priority­group pgid 2 description
"Biz­Critical LAN"
RS G8264(config)# cee global ets priority­group pgid 3 description
"Latency­Sensitive LAN"
RS G8264(config)# cee global ets priority­group pgid 3 priority 5,6 pgid
0 bandwidth 10 pgid 1 bandwidth 20 pgid 2 bandwidth 30 pgid 3
bandwidth 40
priority values:
RS G8264(config)# cee global ets priority­group pgid 15 priority 7
RS G8264(config)# cee global ets priority­group pgid 15 description
"Network Management"
Note: Priority group 15 is permitted unlimited bandwidth. As such, the
commands for priority group 15 do not include bandwidth allocation.
(Select a group for regular LAN, and
set for 802.1p priorities 0, 1, and 2)
(Set a group description—optional)
(Select a group for SAN traffic, and
set for 802.1p priority 3)
(Set a group description—optional)
(Select a group for latency traffic,
and set for 802.1p priority 4)
(Set a group description—optional)
(Set a group description—optional)
(Configure link bandwidth restriction)
(Select a group for strict traffic, and
Set 802.1p priority 7)
(Set a group description—optional)