Setting Running Parameters (Special User) - Huawei SmartLogger2000 User Manual

SmartLogger2000-(10-C, 11-C)
User Manual
No. Parameter Description
32 Commande The standards of
d shutdown certain countries and
hold after regions require that
power the SUN2000 remains
recovery in the commanded
shutdown state after
being powered off by
a command and
experiencing a power
failure and recovery.

7.7.3.3 Setting Running Parameters (Special User)

Settings Page
Because of permission restriction, log in to the WebUI as a special user. Choose
Monitoring > SUN2000 > Running Info. to access the setting page.
Figure 7-23 Running Param. (special user)
Issue Draft A (2017-02-15)
Default
Unit
Value
N/A The default
value varies
depending
on the grid
code. The
displayed
value
prevails.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Value Range Remarks
 Disable N/A
 Enable
7 WebUI
99