Re-Collecting Performance Data - Huawei SmartLogger2000 User Manual

SmartLogger2000-(10-C, 11-C)
User Manual
Figure 7-80 Resetting alarms




7.10.7.5 Re-collecting Performance Data

Because of permission restriction, log in as Advanced User or Special User. Choose
Maintenance > Recollect Performance Data to access the target page.
Issue Draft A (2017-02-15)
If you reset alarms, all the active and historical alarms for the selected device are deleted
and the SmartLogger starts to collect new alarms.
If Data Clear is performed on the SUN2000, Alarm Reset must be performed on the
SmartLogger and NMS. Otherwise, the SmartLogger cannot collect alarm information
generated by the SUN2000 after data is cleared.
If Alarm Reset or Data Clear is performed on the SmartLogger, Alarm Reset must also
be performed on the NMS. Otherwise, the NMS cannot obtain alarm information collected
by the SmartLogger after alarms are reset.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
7 WebUI
160