Huawei SmartLogger2000 User Manual page 106

SmartLogger2000-(10-C, 11-C)
User Manual
No. Parameter Description
27 String Specifies the
detection threshold for starting
starting PV string exception
power detection. The false
percentage alarms caused by
fixed shadow shading
can be controlled by
changing this
parameter.
28 Shutdown If this parameter is set
at 0% to Enable, the
power limit SUN2000 shuts down
after receiving the 0%
power limit
command. If this
parameter is set to
Disable, the
SUN2000 does not
shut down after
receiving the 0%
power limit
command.
29 Maximum Specifies the output
apparent upper threshold for
power the maximum
apparent power to
adapt to the capacity
requirements for
standard and
customized
transformers.
30 Maximum Specifies the output
active upper threshold for
power the maximum active
power to adapt to
various market
requirements.
31 Tracking Selects a controller
system vendor.
controller
Issue Draft A (2017-02-15)
Default
Unit
Value
% 20
N/A Disable
kW Smax
kW Pmax
N/A NA
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Value Range Remarks
[1, 100]
 Disable N/A
 Enable
[Maximum If the maximum
active power, active power equals
Smax_limit] Smax_limit, this
parameter is not
displayed.
[0.1, For 1000 V
Pmax_limit] SUN2000s, this
parameter is
configurable only
for the
SUN2000-25KTL-U
S, and the maximum
value is 27.5 kW.
NA N/A
7 WebUI
98