SmartLogger2000-(10-C, 11-C)
User Manual
Figure 4-19 Connecting to a three-wire PT100/PT1000
Figure 4-20 Connecting to a two-wire PT100/PT1000
Issue Draft A (2017-02-15)
The EMI cannot be automatically identified. After connecting cables, log in to the embedded WebUI
and manually add the EMI. For details, see
and Comm. protocol to AI.
After adding an EMI, set its parameters. For details, see
Setting Running
Parameters.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
7.10.7.1 Connecting
Devices. Set Device Type to EMI
Connection over the AI/PT Port
4 Electrical Connection
in
7.7.5.2
52